When assembling a new system
The most common are air cooling and liquid cooling. Air cooling uses fans to dissipate heat from heat sinks, which remove heat from the CPU, graphics card, and other components. This solution is simpler and often cheaper than liquid cooling. Liquid cooling, although more complex and expensive, offers better thermal efficiency. These systems use a pump to move special coolant through water blocks placed on hot components.The heat is then transferred to the heat sink and dissipated by the fans.To prevent components from overheating, you should regularly clean the inside of your Phone Number List computer case from dust, which can block airflow or insulate components, increasing their temperature. It is also important to make sure that the fans are operational and running at the appropriate speed. Optimizing airflow in the case is another important aspect. It is necessary to ensure that fresh air is effectively sucked inside the housing and hot air is effectively removed to the outside.
http://zh-cn.bylists.com/wp-content/uploads/2023/12/Add-a-heading-300x183.jpg
This can be achieved by properly arranging the fans: for example, placing intake fans on the front of the case and exhaust fans on the back or top.or upgrading an existing one, it is also worth considering choosing a case designed for better cooling and using high-quality thermal pastes between the processor and the heat sink. This allows for better heat conduction and can significantly affect the operating temperatures of the component.
頁:
[1]